Please Rotate Device

Control Airborne & Surface Pathogens with GPS

April 15, 2022

GPS logo

Control Airborne & Surface Pathogens

GPS’ NPBI technology works to safely clean the air inside commercial and residential buildings. The patented technology uses an electronic charge to create a plasma field filled with a high concentration of + and – ions.

GPS’ NPBI Technology Benefits

Blue wind icon

Control Airborne Pathogens

During the GPS cleaning process, the NPBI technology attacks and kills viruses, mold spores, and bacteria. The ions steal away hydrogen from the pathogens, leaving them to die, and leaving you with clean and healthy indoor air.

Blue shield icon

Surface Pathogen Protection

The GPS NPBI technology reduces airborne particles (i.e., dust, pet dander, pollen) through agglomeration. The ions attach to the airborne particles. The particles are subsequently attracted to one another, effectively increasing their mass and size. The air filtration system easily captures the larger particles, increasing the capture efficiency of your HVAC system.

Blue Wind icon

Provide High-Quality Indoor Air

During the GPS cleaning process chemical, pet, cooking, and other odors are broken down into basic harmless compounds, leaving the indoor air fresh smelling and free of odor-causing VOCs.

The NPBI Process

As ions travel by the airstream they attach to particles, pathogens, and gases. The ions help to agglomerate fine sub-micron particles, making them filterable. The ions kill pathogens by robbing them of life-sustaining hydrogen. The ions breakdown harmful VOCs with an Electron Volt Potential under twelve (eV<12) into harmless compounds like O2, CO2, N2, and H2O. The ions produced travel within the air stream into the occupied spaces, cleaning the air everywhere the ions travel, even in spaces unseen.

GPS FAQ

How long do the emitter brushes last?

Accelerated life-cycle testing of the emitter brushes has shown them to last more than 20 years. This also includes the motor that actuates the arm that cleans the emitter brushes.

Is NPBI safe for people and animals?

GPS’ NPBI products are completely safe for humans and animals. With over 150,000 installations and many testimonials, GPS products have not only proven to be safe, they make the air cleaner and safer. GPS’ technology produces what naturally occurs in nature and since GPS’ technology has been certified by UL 2998 as ozone free, there are no health concerns.

What is the warranty on GPS products?

Equipment manufactured by Global Plasma Solutions, Inc. is warrantied by GPS to be free from defects in workmanship or materials for a period of one (1) year from the date of shipment to the original Customer.

What does universal voltage input mean?

GPS products with universal voltage input means the unit will operate with any voltage in the range of 24 – 240 VAC or DC. The auto-cleaning line of products senses the input voltage automatically and the internal circuitry adapts to the voltage. The GPS-iMOD power supply comes with a built-in selector switch. The GPS-iRIB operates on voltages between 110-240VAC.

Will humidity effect the NBPI ion output?

Humidity does not affect the ionization output; however, if water condenses on the needle tips, ions cannot emit and the ion output will be greatly reduced or cease.

Where is the best mounting location?

The best mounting location is after a pre-filter and before the cooling coil. If this location is not possible, the device may be mounted after the cooling coil. As a last resort, the device can be mounted before a filter, but the filter will stop the ions and there will be no further benefit downstream of the filter.

Does the technology generate line noise or EMF?

GPS’ technology does not generate line noise and does not generate electromagnetic forces. GPS’ technology is the only ionization technology approved by the FAA for installation on aircraft since it’s pass the stringent DO-160 certification, proving no line noise and no EMF, which could be detrimental to aircraft avionics, if produced.

Let’s Create a Healthier, More Sustainable Future.

Comfort Systems USA Servicing Arizona Icon

PHOENIX, AZ:
(602) 437-4428 (Service)
(480) 940-8400 (Construction)

Comfort Systems USA Servicing Arizona Icon

TUCSON, AZ:
(520) 628-8640 (Service)
(520) 629-0820 (Construction)

Comfort Systems USA Servicing New Mexico Icon

ALBUQUERQUE, NM:
(505) 856-9250